After you’ve received the printer you’ll probably hurry right ahead to take it out of the box. There are a couple of Hewlett Packard A 630 printer instructions you should follow. Make sure you remove the packing tape and materials around the printer. In the box you should find the actual printer, power supply and adapters, a couple of basic guides, HP Advanced Photo paper sampler and an introductory HP 110 Tri-color print cartridge that will last you for about 10 photos. After you’ve placed all the ‘accessories’ away, in a safe place, just place the printer on your desk and raise the printer’s screen. If you need an adapter plug for your country, make sure to connect it to the power cord. If not, proceed to connection the power cord to the back of the printer and into an electrical outlet. You can now press the ON button to turn the printer on.

Staring at the LCD, you will notice it has a protective film. It’s recommended that you peel that off. Upon start, you will need to confirm the language and country/region. As soon as you’ve done that, an animation will start, teaching you how to install an ink cartridge. In case you want to see it again, there will be a ‘repeat’ button so you can just press that. To install the cartridge, just open it’s package and pull the pink tab to remove the tape. Then open the output tray and the print cartridge door. Place the cartridge into the cradle, label facing up. Also make sure that the copper-like contacts are facing towards the inside. Push the cartridge a bit. As soon as you hear it snap into place, then you can close the cartridge door and start printing.

HP made sure that you get all instructions in the manuals as well as on the actual printer, therefore, you’ll be watching another animation teaching you how to align and load your paper. Place a few sheets of paper (you have some included in the sample pack). Glossy side of the paper has to be facing the front of the printer. After you’ve managed to align it correctly, just press OK to print for the first time.

There are two ways to use the HP A 630 for printing. One way is to insert a memory card straight into the printer’s slot (the card does not insert all the way into the printer, but the memory card light will flash then remain solid after the card is inserted correctly). On the menu, on the LCD, you can select view and print. All the photos on your page will be listed, and you can simply select any of them to print them out.

The other way to print is the standard, old-fashioned way, aka using your PC. Hp made sure that the user isn’t inconvenienced with installing drivers, thus, as soon as the printer connects to the computer, HP quick connect software will autorun. You can just follow the instructions on the PC screen to install the software. After the install is done, it basically works like any other printer.This pretty much covers Hewlett Packard A 630 printer instructions and by following this simple steps you should have no problems at all.

Watch tweets on: