The toner replacement of a laser printer, such as Brother HL 3040 is an easy job, especially because it is not a toner that is replaced as often as the cartridges from the inkjet printers. This type of printer is replaceable at larger periods of time. The estimated price of the printer, as seen on the brother-usa.com is of $269.99. The maximum resolution of the printer is of 600×2400 dpi. The printer has a built-in Ethernet network and it is available to be used without cables. This is possible because the printer works Wirelessly.

You can load 250 sheets of paper at once and they will be enough for printing a large document. You don’t need to hold the paper so that the printer to capture the exact piece of paper. This is done automatically, like I have said in one of my previous articles referring to this model. But right now, I want to present how to actually remove the old cartridge and replace it with a new one.

Of course, I don’t need to say this, I hope you know, after replacing the new cartridge, you need to replace it using the software driver of the printer, otherwise the printer will not recognize that it uses another cartridge right now and the power of printing that it has is much greater right now. It is a bit odd to see how a laser printer cartridge is replaced, but they are replaced as well, just like the inkjet type printers.

You need to turn on the printer, and remove the casing of the printer so that you will see how the cartridges are moving. Then turn off the printer and gently pull out the cartridges. Then after you replace it with a new one, you may turn on the printer one more time and see if the printer prints correctly now. Don’t forget to perform the usual maintenance procedure that is necessary when you replace a cartridge.

Watch tweets on: